Hi all, bit of an odd predicament here. I was following this post to get the auto open/close working on my pano sunroof, as previously, it seemed either direction I pushed the button would cycle the sunroof through all of its motions.
So, I turned the car on, and held the sunroof button back to open the sunroof. It went all the way open, then began to close (it has always done this). Once it closed, I continued to hold for 5 seconds.
Now the sunroof won't move at all. I'm worried I "configured" it to a permanently shut position. I've unplugged the battery (for 30 minutes), pulled the fuse for the sunroof, unplugged the switch, unplugged the motor, and held the switch in every position for 30 seconds or more.
Any thoughts on how to undo this? Thanks!
PFA
So, I turned the car on, and held the sunroof button back to open the sunroof. It went all the way open, then began to close (it has always done this). Once it closed, I continued to hold for 5 seconds.
Now the sunroof won't move at all. I'm worried I "configured" it to a permanently shut position. I've unplugged the battery (for 30 minutes), pulled the fuse for the sunroof, unplugged the switch, unplugged the motor, and held the switch in every position for 30 seconds or more.
Any thoughts on how to undo this? Thanks!
PFA