mynameisgoodspeed
New member
- Location
- Austin, TX
- Car(s)
- 2015 Sportwagen TDI
Seems I've possibly bricked my MIB2. Got everything installed in the car, went to do the CP removal congo/duke method via SD card and it must have been done already. After reading through the MIB tool box there is some fine print in there that says if you do the congo/duke method twice it will corrupt the FW on your MIB2 unit and cause it to enter an endless reboot loop. Looks like there is a way to force load the FW back onto the unit during boot up using a TTL serial converter and PUTTY but this is WELL beyond my abilities. Looking for someone a little (read: MUCH) more experienced with this platform/upgrade to help me fix the issue. Hoping I didn't permanently destroy the MIB2 unit I have.