Search results

I'm trying to figure out what exactly the OE Mk7 fluid is. Part is G 052 145 S2. I assume any API GL-5 75w90 gear oil would work, but if you google the part number, you get results matching Castrol Syntrax Long life, Fuchs Sintopoid, Motul Gear 300 (two GL-5 oils and a dual-rated GL-4/GL-5)...

I've been through several iterations of these and wanted to put some info in one place. There's lots of info spread out, some of which I wish I'd seen before having my subframe dropped 4+ times trying different solutions. Firstly, there are two bushings in the front control arm. The forward...

$300 + shipping. Great condition, the large blemish on the front cover is exaggerated by the camera.

iSweep power brace - center floor rear: A3/S3/RS3 8V/Golf/GTI/Golf R https://neuspeed.com/collections/volkswagen-golf-r-mk7-2-2-0l-tsi/products/isweep-power-brace-center-floor-rear-isccfbrg7 Unused, test fitted center section. SOLD TB Performance rear chassis brace...

PSA: Looks like the 8Y RS3 ducts were updated to be a bit more aggressive. thanks @StorableComa for confirming the p/n Part numbers are very similar to before: 8V0407812A 8V0407811A $16 per side on e-acca, save yourself some cash.

VWR Catch can system (includes drain hose): SOLD APR catch can system (full plate, Nov '21 build date, post seal-fix): SOLD Forge catch can: $140 + shipping. Unused. ECS billet dogbone arm (DQ381) + powerflex hybrid puck (PFF85-831 -- "A" shape insert"): $50 + shipping. Great combo for...

deleted

VLK-003 with DSG $500 + shipping OBO SOLD Unmarried from car, has EQT DSG tunes for 14B and 14Q box codes. A Stage 2 93 tune for Mk7.5 (259Q box code) w/ brushless LPFP. V2.52. Stage 2 93 with burbles in sport for 259K and COBB01 (consolidated rom), both 1.08 and 1.10. Comes with mount...

Up for sale is a custom suspension kit I put together. Essentially it's a track-spec, height-adjustable bilstein coilover kit. Similar to B14 but with much nicer height adjusters and higher, linear spring rates. SOLD New ground control coilover conversion with 475lb/in front and 650lb/in rear...

Was on car for 5,000 miles, went back to IS38 for tuning/classing reasons. No shaft play, spins freely. Exhaust housing coated by DBV2. Sold d

VWR150002 Picked this up a few weeks ago, never installed. For aluminum subframe vehicles (8v A3/S3, 8Y A3/S3, Mk8 Golf). Not available

ISO either a switchpath or track edition (preferably the new style, no big suitcase) for a Mk7.5 Golf R. Willing to pay for shipping within US.

$1350 + shipping SOLD Pagparts brushless LPFP with OEM brushless pump controller, harness, and in-basket serviceable fuel filter. Supports 800+ whp on ethanol, this is not a retrofitted RS3 pump. Walbro E5LM, same pump as the Iroz kit. Highly doubt you'd need anything more than this on a 2.0T...

I know, very mild. Hit me up if you've got a set.

Superpro aloy0018k : 450 + shipping Sold New, never used. Small caster/camber increase, works with both steel and aluminum subframes. https://superprousa.com/products/aloy0018k-superpro-alloy-arm-kit

$800 + shipping. SOLD Installed for about a year with no issues. ESC off works fine. Moving to passive dampers. https://www.dscsport.com/product/v4-controller-golf/ Should work on any DCC-enabled GTI/R. APR version of this comes with the exact same calibration. Shoul

Used Vortex XL: $sold Calibrated wastegate actuator included. Zero shaft play. Saw no more than 33psi (installed for 5k miles) Buyer pays shipping. Stamp on compressor just says Vortex, because I purchased the XL housing after the fact. Can provide receipt for turbine if necessary.

$850 OBO SOLD 19x8 et50 wheels, 5x112 bolt pattern. Came off a 2019 Golf R, purchased the car January '20 and the wheels were removed immediately and garage-stored since then. One wheel has a small ding. Tires are 235/35/19 contisportcontact summers. ~6k miles on them, 8/32" remaining. Can...

$500 + s/h SOLD Painted with G2 high temp yellow caliper paint. Includes Neuspeed lines in Mk7 fitment + Racingbrake high temp dust boots (not installed). Never used.

Spulen Catch Can Adapter V2 : $100 + s/h OBO Used for ~6k. Includes hardware and gasket. Recommend loctite for bolts and hose clamp/ziptie for EVAP hose. IE Turbo Inlet Pipe: $60 + s/h Also has about 6k on it. Gasket still fine. Includes silicone couplers for both IE and non-IE intakes. Sold