Search results

sending pm

If I have a mib2 retrofit in my 2015, and decide to replace the mib2 main unit (Delphi currently- > swapping to harman 3g0) will I need all FECs installed again or simply component protection removed?

I did coding in MIB for the external sound, I'll have to double check the screen wiring as it's the factory mib1 wiring in my gti

As the title suggests, im exploring other avenues. I did MIB1 to MIB2 and I have problems with audio not working, lag in screen touch, no screen at all. My setup is from a 2016 and cannot be further upgraded with new software according to different people I've discussed with. I understand...

SOLD

I used a screen and main unit from a 2016 gti. I'm guessing because of it's inability to be updated, that its an earlier version. My unit was programmed by simaservis and he was the one that originally told me it could not have it's software updated further. I want to think upgrading the main...

I am at my wits end with my mib2 conversion. It's a technisat unit from a 2016. I use the MOST connection to interface with a nav-tv zen v optical. Regularly the main unit requires restarting by holding the power button down, because it will not play audio or have any volume. I've been told...

Bump

Bump, lowered to 225!

so far a few bites but nothing with commitment. appreciate the words 🤜

Bump

Pm sent

Bump

I'm about 40 min from west Chester - south.

another run this am. nothing done since previous run https://datazap.me/u/lurchalicious/log-1666693353?log=0&data=8-14-19-33-38-41 stft looks more in line.

bump

Ran mine on eqt stage 2 93 for 40k with no issues. Now on XL with all supporting mods and still holding for the time being. If it gives out ill be going back to DMF and using a ringer racing clutch. The chatter from SMF isn't worth the benefit to me, plus as I also daily drive this the DMF...

Havent updated in a while - basically we never found out why the STFT were being odd. Everything else in the logs looked normal so I proceeded with dyno tuning. after the tune the car drove fine and I started seeing the STFT go into single digits at WOT. So I figured it was fine. I...

I have a full MST intake for sale consisting of the metal airbox, filter, connection hose and a MST V1 inlet pipe. Box and inlet pipe have wear as shown and the airbox is missing a side tab. Box still sits in place without. 225 shipped for the whole thing to lower 48 US