I just removed mine recently, could not find any helpful DIY's other than a diagram.
I'm kicking myself for not making a video when reinstalling it, could have cashed in on that youtube money
seriously though - I may make an instructional video. won't actually take it apart again but I think it will help. if you can wait til the weekend I'll do it while it's daylight. I don't have a garage...
Same boat as you. Unheated garage without power.
This is from memory
Pull shifter all the way up and cover brake with a towel and secure it with tape.
Remove shifter surround and pry up the metal reinforcement bracket
Remove shifter and boot
Pull out the cubby
Remove now exposed torx bolts for the shifter surround
Remove faceplate for climate control
Slowly pull pins for climate control
Remove now exposed torx bolts
Remove footwell paneling
Remove rear console side bolts (under plastic covers visible from the rear seats
Remove rear vent
Remove the 2 bolts on the bottom
Lift up center console and support with a rolled up towel
Unplug all the 12v and other connections
Pull out the console
I probably missed a step but I'm at a bar [emoji2369]
PM me if you want to chat or talk on the phone. A walkthrough is deserved but I'm lacking light/electricity in my cheap rental garage. If no one does a diy soon I'll make one in the spring
P.S. DO NOT REMOVE the trim piece highlighted in yellow in the attached photo. You can remove the console without touching this peice. And if you remove it you will break most of the clips lol